RAI Amsterdams brand Rematec Asia is a collaboration with the Remanufacture Committee of China Association of Automobile Manufacturers (CPRA) and the China National Machinery Industry International Co., Ltd. (SINOMACHINT.) Mr. Zhao Lizhi, General Manager of SINOMACHINT and Mr. Xie Jianjun, Secretary General of CPRA give their view on the development of the Chinese remanufacturing industry and welcome visitors and exhibitors to the third consecutive edition of Rematec Asia with the following words.
Mr. Zhao Lizhi states "This year marks a leap forward in the development of remanufacturing in China. At the beginning of the year, the executive meeting of the State Council deliberated and approved the Administrative Measures for the Recycling of End-of-Life Motor Vehicles (Revised Draft), which made a major policy adjustment to the recycling of end-of-life motor vehicles. This adjustment will effectively foster competition in the recycling and dismantling industry and will play an important role in improving the technical level of the industry. Therefore, it is regarded as a further liberalisation of the remanufacturing industry. There is no doubt that this measure will stimulate new vitality of the market and will certainly have a profound impact on the development of the automotive industry, thus enhancing the green recycling development.
Despite the ongoing impact of the epidemic on the auto parts and remanufacturing industry, it has been noticeable over the year that more capital is flowing into the remanufacturing industry. More and more manufacturers and dealers have noticed the huge potential of this industry and are determined to engage in it. This has reinforced our belief in the bright future of this industry and has boosted our determination to run a good exhibition, provide more valuable services, and promote the development of the remanufacturing industry.
In the preparation of this year’s exhibition, we put more focus on the current market demand, and on how to make this exhibition more effective and deliver more useful information to participants, so that we can help enterprises deepen the domestic market and also expand their presence in the overseas markets. Although overseas enterprises were not able to attend the exhibition this year, many of them continued to express great interest in the Chinese market. Eight experts and executives from the European remanufacturing industry will participate in the exhibition via video. They will give speeches and exchange views on the remanufacturing development in Europe, the differences of remanufacturing industries in various countries, and how to build a successful remanufacturing business model. These videos will also be open to more audience in the form of “ Remanufacturing Open Course” on our WeChat official account.
We invite you to pay attention to the exhibition as well as the “2021 Forum on High Quality and Standardized Development of China's Auto Parts Remanufacturing” held at the same time. Themed on “Self-regulation, Standardisation, Innovation and Carbon-reduction”, the forum will provide an in-depth analysis of how to organise and implement the important tasks in relation to auto parts remanufacturing in the 14th Five-Year Plan for Circular Economy Development, and further promote the "Interim Measures for the Standardized Management of Auto Part Remanufacturing". In addition, it will discuss the key issues to be addressed for the standardised development of the remanufacturing industry and realise a high-end dialogue among automotive remanufacturing enterprises.
We would like to express sincere gratitude to our partners -- RAI Amsterdam and CPRA. With the same belief, we make joint efforts for every progress of the exhibition in order to provide the best service for customers, help everyone achieve higher value, and promote the rapid and healthy development of the industry. At the same time, we would also like to express our gratitude to the People’s Government of Hejian not only for its continued support but for its contribution in promoting the development of the remanufacturing industry. In addition, we would like to extend our highest respect to all the exhibitors, purchasers, partners, and friends from the media who have given us advice and help in the preparation of the exhibition. Finally, I sincerely hope that all of you will enjoy the exhibition and will give us valuable feedback on our progress."
Mr. Xie Jianjun, Secretary General of China Association of Automobile Manufacturers
Mr. Xie Jianjun says the following: "With the joint efforts of all remanufacturers, the past three Asian remanufacturing exhibitions have achieved remarkable results and brought immediate economic benefits to enterprises. At the same time, we are pleased to realise that the whole of Guangzhou and even Asia are one of the important territories for the development of China's auto parts remanufacturing industry. Therefore, we have more reason to look forward to the excellence of each Asian remanufacturing exhibition in the future.
Rematec Asia 2021 will join hands with more than 100 exhibitors again. The exhibition will not only focus on exhibition and business functions, but also focus on the latest remanufacturing technologies and equipment at home and abroad, and extend to the exchange of automobile remanufacturing policies, technologies, markets and other fields. At that time, we will hold the "2021 China auto parts remanufacturing high quality standardization development forum" with the theme of "self-discipline, standardization, innovation and carbon reduction". The forum will invite leaders of national competent departments of auto parts remanufacturing industry, authoritative experts of scientific research institutes and major remanufacturing enterprises in China to jointly and deeply interpret and discuss how to organise and implement the important tasks related to auto parts remanufacturing in the 14th five year plan of circular economy, and continue to publicise and implement the latest contents of the Interim Measures for the standardized management of auto parts remanufacturing, Release the latest domestic and international development achievements of auto parts remanufacturing industry, exchange domestic and foreign remanufacturing development experience, and jointly promote the progress of China's auto parts remanufacturing industry.
2021 is destined to be an extraordinary year. Due to the repeated impact of the epidemic and various uncertain factors, it has brought a severe test to the whole auto parts remanufacturing industry. However, this year is also a milestone year for the development of China's auto parts remanufacturing industry. The long-awaited Interim Measures for the standardized management of auto parts remanufacturing has finally been officially released. As the economy and society have entered a new stage of development, the remanufacturing industry has injected new vitality into enterprise production. Therefore, 2021 Asian remanufacturing exhibition is one of the shortcuts that can quickly restore the trade exchanges of enterprises. Seize this opportunity and seize the market at the first time.
I wish all of you have something to gain in this exhibition, and I believe all guests will find new business opportunities here and return with full load."
Rematec Asia is co-located with Auto Aftermarket Guangzhou 2021 and opens on Friday 5 November for three full days of trade, knowledge and network. More information about the programme and exhibitors can be found at http://www.rematecasia.com.cn/