Products
Injectors & UIS
Common Rail, PD/UIS, PPD of brands Bosch, Siemens VDO, Denso, and Delphi for passenger cars, commercial vehicles, LCV, buses, and industrial machinery
Remanufacturing car parts aligns with and supports the principles of the circular economy. By remanufacturing, we save up to 80% of materials and 55% of energy that, under normal circumstances, would be necessary for the production of new parts. The REMAN process begins with disassembling each injector into its individual components, which are then cleaned using an ultrasonic cleaner. Each component is carefully inspected under a microscope, and if necessary, replaced with new or remanufactured.
Turbochargers
Turbochargers for passenger cars, commercial vehicles, LCV, busses, agricultural and industrial machinary. Garrett, KKK, BorgWagner, IHI, Holset, etc.
Every turbocharger we remanufacture passes through a process of dismantling, complete component inspection, replacement of damaged internal components (CHRA, bearings, rotor, regulation, etc.), and sandblasting. After dynamically balancing the center of the turbo, we test it at the CIMAT test station. We remanufacture turbochargers with mechanical and electronic regulation for cars and trucks of all brands. Each turbo is delivered with a test report, an oil syringe, and an installation manual.
Diesel pumps
Common Rail, VP, Zexel, VE, and VA pumps from brands such as Bosch, Siemens VDO, Denso, and Delphi
Car parts remanufacturing saves not only the environment but also our customers' finances. The process of remanufacturing saves up to 80% of material and 55% of energy. It starts with dismantling and evaluating all components. Damaged parts such as solenoids, mechanical valves, shafts, pistons, high-pressure heads, bodies, and gaskets are replaced with new, original parts. All pumps are delivered with a test report and an installation manual.
AdBlue Tanks
Remanufactured AdBlue Tanks for Peugeot, Citroen, Opel, and DS
The environmentally friendly remanufacturing of AdBlue tanks starts with a thorough inspection of the external parts, followed by a careful cleaning and diagnostics to reveal defective components. Once the problem parts have been identified, the next step is to repair or replace the damaged parts. Once assembled, the tanks are thoroughly tested to ensure full functionality and reliability. Finally, the remanufactured tanks are carefully packaged and ready for distribution.
Steering racks
Remanufactured steering racks from brands such as TRW, Bosch, Koyo, and ZF
Steering parts are essential components that ensure the proper functioning of a vehicle's steering system. These include various elements such as steering racks, steering gearboxes, steering pumps, and more. Our range includes steering racks a box for a wide variety of vehicles, from passenger cars to trucks. Each part is remanufactured to the highest quality standards and tested for reliability and durability.
Brake Calipers
Remanufactured brake calipers from brands such as TRW, ATE, Bosch, and Brembo
Brake calipers are part of every passenger car or truck and are responsible for our safety. Due to the high strain of the calipers and their location where they have to face numerous impurities, their failure is very likely When remanufacturing these parts, it is important to re-examinate the remanufactured components and to use new components that are necessary for maximum caliper function (piston chamber seal). Consequently, emphasis is placed on braking testing, which is often very strict.
Dual Mass Flywheel
DMF for passenger cars and light commercial vehicles, brands Luk, Sachs, Valeo
Every dual-mass flywheel we remanufacture undergoes complete disassembly, thorough cleaning, blasting to remove corrosion, and inspection. Worn components are replaced using original parts from Sachs, Valeo, or LuK. The flywheel is then reassembled, ground for smoothness, and dynamically balanced to eliminate vibrations. Each unit is delivered with top precision and reliability to ensure flawless operation.
Alternators
Alternators for passenger cars brands Bosch, Hella, Valeo, Magneti Marelli
Remanufacturing alternators saves 80% of material and 55% of energy compared to new production. The process involves disassembly, sandblasting, replacement of worn components (bearings, diodes, rotor, stator), and thorough inspection. Once reassembled, each alternator is tested on a specialized station to ensure top performance and reliability.
Starter
Starters for passenger cars brands Bosch, Hella, Valeo, Magneti Marelli, Mitsubishi
Professionally remanufactured REMANTE starters offer a high-quality, cost-effective alternative to new parts. The process involves dismantling the unit, replacing worn or damaged components like the sintered bronze bushings and copper terminal contacts, and thorough testing to ensure OEM-level performance. By returning functional parts to operation, this eco-friendly process avoids waste and delivers starters with durability and reliability equal to new ones.
ABS & ECU
ABS and ECUs for passenger cars, light commercial vehicles, trucks and busses
We are experts in repairing engine control units, ABS and gearboxes for cars and trucks. The units are repaired using a special diagnostic equipment and instruments we have in our production. As a result we are capable to repair control units from all manufacturers from ACDelco, Bosch, Siemens, to TRW and Zexel. Most often we repair control units from Škoda and VW group. Due to the skills and technical knowledge of our technicians, we also repair Instrument shields and actuators.
Gearbox actuator
Gearbox actuators for trucks. Brand WABCO
Remanufacturing car parts saves up to 80% of materials and reduces energy consumption by 55% compared to new production, benefiting both the environment and customers’ budgets. The ECU is diagnosed and repaired as needed, while critical elements such as the gear, split cylinder, and pistons are restored. All gaskets, seals, and screws are replaced to ensure reliable performance and optimal functionality.
EGR modules
We remanufacture EGR modules for Scania, Volvo, MAN, and more.
Remanufacturing EGR modules reduces CO2 emissions by 75% while protecting the environment. We remanufacture EGR modules for Scania, Volvo, MAN, and more. The process involves dismantling, cleaning, sandblasting, and replacing worn components. New cooling rods with a spiral design are installed to enhance heat removal, improving performance. Gaskets, valves, and throttle valves are replaced, and the module is reassembled, tested for coolant leaks, and painted for durability.
Torque converter
Torque converter for passenger cars and light commercial vehicles, brands Luk and Sachs
We are supporting circular economy. We are remanufacturing Sachs and LuK hydrodynamic converters. Hydraulic converters are part of the automatic transmission. The remanufacturing of hydrodynamic convertors is done on modern computer-controlled machines. Finally the hydroconverter is exported. During the remanufacturing process we emphasize the accuracy of processing and setting, since the slightest deviation could cause hydroconvertes malfunction such as vibration, jerking or slipping. Why would